Module bmb
Brief summary
The bmb module computes the basal mass balance state.bmb (m ice eq. yr⁻¹, positive for a gain, like smb), the basal source term of the thickness equation \(\partial_t h + \nabla\cdot(h\,\bar{\mathbf{u}}) = \mathrm{smb} + \mathrm{bmb}\) solved by the thk module. Under grounded ice it is minus the thermodynamic basal melt of the enthalpy module; under floating ice exposed to the ocean it is minus the sub-shelf melt rate of the selected law (prescribed, quadratic, pico, picop or plume), which reads the ocean properties of the ocean module. The parameters of the module are described here.
State variables
Reads: —
Writes: bmb, shelf_melt_rate, grounded_fraction
The module is opt-in: a land-terminated glacier does not need it. With method: zero and include_grounded_melt: true it only forwards the enthalpy melt (bmb = -basal_melt_rate).
Melt laws
The sub-shelf melt rate \(m\) (m ice eq. yr⁻¹, positive for melt) is given by method:
zero— no ocean melt.prescribed—prescribed.formselects a uniform rate (constant,prescribed.value), a 2-D state variable (field, named byprescribed.field), or the MISMIP+ Ice1 melt (mismip_plus, Asay-Davis et al., 2016): \(m = \Omega \tanh(H_c/H_0)\,\max(z_0 - z_d, 0)\), with \(H_c\) the water-column thickness and \(z_d\) the ice draft.quadratic— the quadratic thermal-forcing law \(m = \gamma_0 \left(\frac{\rho_w c_o}{\rho_i L}\right)^2 (\mathrm{TF} + \delta T)\,|\langle \mathrm{TF}\rangle + \delta T|\), with the thermal forcing TF of theoceanmodule at the ice base and \(\langle \mathrm{TF}\rangle\) itsaveraging:local(TF itself),shelf(mean over each ice shelf) orbasin(mean over the shelves of each basin of thebasinsstate variable, the ISMIP6 non-local form of Jourdain et al., 2020). Withwater_equivalent: true(the default) \(\gamma_0\) gives a melt in m w.e., as in ISMIP6, converted to ice.pico— the box model of Reese et al. (2018): each ice shelf is divided into up ton_boxesboxes by distance from the grounding line, and the ocean water of the continental shelf (bed abovecontinental_shelf_depth) is carried box by box with the overturning strength \(C\) and the heat-exchange velocity \(\gamma_T\); the freezing point is the PICO potential-temperature form \(T_f = aS + b - cp\).reference_distancesets the grounding-line distance at which a shelf hasn_boxesboxes (0: the largest distance in the domain), and grounded areas smaller thanmaximum_ice_rise_areaare ice rises rather than grounding line.picop— the box properties of PICO with the plume melt of Lazeroms et al. (2018) (Pelle et al., 2019).plume— the buoyant-plume melt of Lazeroms et al. (2019), fed by the ocean properties at the grounding-line depth of each shelf node.
For picop and plume, the grounding-line depth feeding each shelf node is carried along the ice flow from the grounding line (grounding_line_depth, a diffusion-regularized advection solved by Jacobi sweeps), so these two laws need iceflow to have run.
The law is evaluated every update_freq years (0: every step); the geometry, the grounding-line weights and bmb are updated every step. Between two evaluations, a node that has become floating takes the melt of its shelf neighbours at the last evaluation. The result is multiplied by melt_enhancer; negative rates (refreezing, e.g. in the outer PICO boxes) are clipped at zero unless allow_refreezing: true. With ocean_connected_only: true (the default), ocean melt is applied only under floating ice connected, through water, to the open ocean (a domain side with a zero thickness boundary, or else the ice-free water), not over subglacial lakes.
Grounding line
Across the grounding line the grounded and ocean melts are weighted by the grounded fraction \(g\) of each node's cell, estimated from grounding_line.sub_samples samples of the bilinear flotation function (published as state.grounded_fraction):
with the ocean weight \(w\) set by grounding_line.treatment: nmp no ocean melt in the cells crossed by the grounding line, fmp full ocean melt in every cell containing floating ice (both after Seroussi and Morlighem, 2018), pmp ocean melt weighted by the floating fraction (Leguy et al., 2021).
Module ordering
Run bmb after enthalpy (for the grounded melt), after ocean (for the ocean properties), after iceflow for picop and plume, and right before thk:
Example usage
ISMIP6-like quadratic melt from an ocean profile, with the melt scaled by the floating fraction near the grounding line:
# @package _global_
processes:
ocean:
method: profile
bmb:
method: quadratic
quadratic:
averaging: shelf
gamma0: 1.4477e+4
grounding_line:
treatment: pmp
thk:
front:
method: sub_grid
MISMIP+ Ice1 melt, no melt in the grounding-line cells:
Parameters
The complete default configuration file can be found here: bmb.yaml.
Structure of the parameters:
bmb
├── method
├── update_freq
├── include_grounded_melt
├── melt_enhancer
├── allow_refreezing
├── ocean_connected_only
├── grounding_line
│ └── ...
├── physics
│ └── ...
├── prescribed
│ └── ...
├── quadratic
│ └── ...
├── pico
│ └── ...
├── picop
│ └── ...
├── plume
│ └── ...
└── grounding_line_depth
└── ...
Description of the parameters:
| Name | Description | Default value | Units |
|---|---|---|---|
method
|
Sub-shelf melt law: zero (no ocean melt; with include_grounded_melt, bmb = -basal_melt_rate), prescribed, quadratic, pico, picop or plume. |
prescribed | — |
update_freq
|
Re-evaluate the sub-shelf melt law every X years; the geometry, the grounding-line weights and bmb are updated every step. 0 evaluates the law every step. |
0.0 | yr |
include_grounded_melt
|
Use the thermodynamic basal melt of the enthalpy process (basal_melt_rate) under grounded ice, when it is available. |
True | — |
melt_enhancer
|
Multiplicative factor applied to the sub-shelf melt rate. | 1.0 | — |
allow_refreezing
|
Keep negative sub-shelf melt rates (marine-ice accretion) instead of clipping them at zero. PICO refreezes in its outer boxes under cold shelves: set it to true to keep that. | False | — |
ocean_connected_only
|
Apply ocean melt only under floating ice connected, through water, to a domain side with a zero thickness boundary (or, when no such side touches water, to ice-free water), not over subglacial lakes. Periodic sides are not wrapped around. | True | — |
grounding_line
| Name | Description | Default value | Units |
|---|---|---|---|
grounding_line.treatment
|
Melt near the grounding line: nmp no ocean melt in cells crossed by the grounding line and fmp full ocean melt in every cell containing floating ice (Seroussi and Morlighem, 2018), pmp ocean melt weighted by the floating fraction (Leguy et al., 2021). The grounded part of each cell receives the thermodynamic melt. |
nmp | — |
grounding_line.sub_samples
|
Samples per direction and per quarter cell of the bilinear flotation function, used to estimate the floating fraction of each node's cell. | 4 | — |
physics
| Name | Description | Default value | Units |
|---|---|---|---|
physics.c_ocean
|
Specific heat capacity of sea water. | 3974.0 | J kg\( ^{-1} \) K\( ^{-1} \) |
physics.L_ice
|
Latent heat of fusion of ice. | 334000.0 | J kg\( ^{-1} \) |
prescribed
| Name | Description | Default value | Units |
|---|---|---|---|
prescribed.form
|
Prescribed melt: constant, field (a 2-D state variable) or mismip_plus (MISMIP+ Ice1, Asay-Davis et al., 2016). |
constant | — |
prescribed.value
|
Uniform melt rate of the constant form. |
0.0 | m yr\( ^{-1} \) ice eq. |
prescribed.field
|
Name of the state variable holding the melt rate of the field form (m ice eq. yr^{-1}, positive for melt). Do not use bmelt, an alias of the enthalpy basal_melt_rate. |
prescribed_melt_rate | — |
prescribed.mismip_plus.omega
|
Melt-rate factor Omega of m = Omega tanh(H_c/H0) max(z0 - z_d, 0). | 0.2 | yr\( ^{-1} \) |
prescribed.mismip_plus.H0
|
Water-column thickness scale H0. | 75.0 | m |
prescribed.mismip_plus.z0
|
Depth z0 below which melting occurs, relative to the water level. | -100.0 | m |
quadratic
| Name | Description | Default value | Units |
|---|---|---|---|
quadratic.averaging
|
Thermal forcing local (TF itself), shelf (mean over each ice shelf) or basin (mean over the ice shelves of each basin of the basins field, the ISMIP6 non-local form of Jourdain et al., 2020). |
shelf | — |
quadratic.gamma0
|
Heat-exchange velocity. The default, 14477 m yr^{-1}, is the value used by Kori-ULB for the ISMIP6 non-local MeanAnt calibration of Jourdain et al. (2020). | 14477.0 | m yr\( ^{-1} \) |
quadratic.delta_T
|
Offset added to the thermal forcing. | 0.0 | K |
quadratic.water_equivalent
|
Interpret the melt given by gamma0 in m water equivalent, as in Jourdain et al. (2020), and convert it to ice. | True | — |
pico
| Name | Description | Default value | Units |
|---|---|---|---|
pico.n_boxes
|
Maximum number of boxes of an ice shelf. | 5 | — |
pico.gamma_T
|
Turbulent heat-exchange velocity. | 2e-05 | m s\( ^{-1} \) |
pico.overturning
|
Overturning strength C. | 1000000.0 | m\( ^{6} \) s\( ^{-1} \) kg\( ^{-1} \) |
pico.rho_star
|
Reference sea-water density of the linear equation of state. | 1033.0 | kg m\( ^{-3} \) |
pico.alpha
|
Thermal expansion coefficient. | 7.5e-05 | K\( ^{-1} \) |
pico.beta
|
Haline contraction coefficient. | 0.00077 | (g kg\( ^{-1} \))\( ^{-1} \) |
pico.reference_distance
|
Distance from the grounding line, measured along grid paths (edge-neighbour steps) as the PICO distances are, for which a shelf has n_boxes boxes. 0 uses the largest distance in the domain, as Reese et al. (2018) do over all Antarctic ice shelves; set it for regional domains, whose largest shelf would otherwise always get n_boxes boxes. |
0.0 | m |
pico.continental_shelf_depth
|
Deepest bed, relative to the water level, of the ice-free ocean whose temperature and salinity feed the ice shelves. | -800.0 | m |
pico.maximum_ice_rise_area
|
Grounded-ice areas smaller than this are ice rises (e.g. pinning points): they are not grounding line, the distances cross them, and shelves joined by one form one shelf, as in PISM (default 1e5 km^{2} there). 0 treats all grounded ice as grounding line, as in Reese et al. (2018). | 0.0 | km\( ^{2} \) |
pico.freezing_point.a
|
Salinity coefficient of the potential-temperature freezing point T_f = a S + b - c p of PICO (Reese et al., 2018). | -0.0572 | °C (g kg\( ^{-1} \))\( ^{-1} \) |
pico.freezing_point.b
|
Constant of the PICO freezing point. | 0.0788 | °C |
pico.freezing_point.c
|
Pressure coefficient of the PICO freezing point, with the pressure p = rho_w g |z| at the ice draft z. | 7.77e-08 | °C Pa\( ^{-1} \) |
picop
| Name | Description | Default value | Units |
|---|---|---|---|
picop.M0
|
Melt scale of the Lazeroms et al. (2018) plume. | 10.0 | m yr\( ^{-1} \) K\( ^{-2} \) |
picop.gamma1
|
Coefficient of the effective heat-exchange (Stanton) number. | 0.545 | — |
picop.gamma2
|
Coefficient of the effective heat-exchange (Stanton) number. | 3.5e-05 | m\( ^{-1} \) |
picop.Cd_Gamma_T
|
Product sqrt(C_d) Gamma_T. | 0.0011 | — |
picop.Cd_Gamma_TS0
|
Product sqrt(C_d) Gamma_TS0. | 0.0006 | — |
picop.E0
|
Entrainment coefficient. | 0.036 | — |
picop.Cd
|
Drag coefficient. | 0.0025 | — |
picop.x0
|
Dimensionless position of the melt-rate transition. | 0.56 | — |
plume
| Name | Description | Default value | Units |
|---|---|---|---|
plume.gamma_T
|
Effective Stanton number. | 0.00059 | — |
plume.E0
|
Entrainment coefficient. | 0.036 | — |
plume.Cd
|
Drag coefficient. | 0.0025 | — |
plume.C_eps
|
Slope correction parameter. | 0.6 | — |
plume.alpha
|
Thermal expansion coefficient. | 3.87e-05 | K\( ^{-1} \) |
plume.beta
|
Haline contraction coefficient. | 0.000786 | (g kg\( ^{-1} \))\( ^{-1} \) |
grounding_line_depth
| Name | Description | Default value | Units |
|---|---|---|---|
grounding_line_depth.epsilon
|
Diffusion regularising the advection of the grounding-line depth along the ice flow (picop and plume). | 1e-05 | m\( ^{2} \) yr\( ^{-1} \) |
grounding_line_depth.tol
|
Convergence tolerance of the grounding-line depth iteration. | 0.01 | m |
grounding_line_depth.max_iter
|
Maximum number of Jacobi sweeps of the grounding-line depth iteration. | 10000 | — |
Contributors: Thomas Gregov.